Print

2010 Subaru Outback

Click here to view 2010 Outback inventory

 

2010 Outback Specifications

ENGINE AND DRIVETRAIN 2.5i, 2.5i Premium
2.5i Limited		 3.6R, 3.6R Premium
3.6R Limited
Engine SOHC 4-cylinder, horizontally opposed (Boxer); aluminum cylinder block and heads, i-Active Valve Lift System (AVLS) DOHC 6-cylinder, horizontally opposed (Boxer); aluminum cylinder block and heads; Dual Active Valve Control System (DAVCS) variable valve timing
Power 170 hp @ 5,600 rpm 256 hp @ 6,000 rpm
Torque 170 lb.-ft. @ 4,000 rpm 247 lb.-ft. @ 4,400 rpm
Manual transmission Standard fully synchronized 6-speed manual Not available
Automatic transmission Lineartronic? CVT (Continuously Variable Transmission) includes manual mode and steering wheel-mounted paddle shifters. 2.5i and 2.5i Premium: Optional.
2.5i Limited: Standard.		 5-speed electronic control automatic with SPORTSHIFT®1 manual mode

SYMMETRICAL ALL-WHEEL DRIVE
Continuous All-Wheel Drive Models equipped with 6-speed manual transmissions utilize a viscous-type locking center differential with torque distribution normally configured at a 50/50-split front-to-rear. If wheel speed differs between front and rear axles, the system helps distribute power to the wheels with the most traction. 3.6R models equipped with a viscous-type limited-slip rear differential.
Active All-Wheel Drive Models equipped with Lineartronic? CVT utilize an electronically controlled variable transfer clutch to distribute power to where traction is needed. Sensors monitor parameters such as wheel slippage, throttle position and braking, to help determine torque distribution and direct it to the wheels with optimum traction.
Variable Torque Distribution (VTD)
All-Wheel Drive		 Models equipped with 5-speed automatic transmission utilize an electronically controlled variable transfer clutch in conjunction with a planetary-type center differential and a viscous-type limited-slip rear differential. Torque distribution is normally configured at a performance-oriented rear-wheel-biased 45/55-split front-to-rear. Sensors monitor parameters such as wheel slippage, throttle position and braking to help determine torque distribution and direct it to the wheels with optimum traction.

STABILITY AND TRACTION
Vehicle Dynamics Control (VDC) VDC electronic stability control utilizes sensors which constantly monitor wheel speeds, steering angle, brake pressure, vehicle yaw rate and lateral g-forces. If VDC detects a difference between the driver's intended path and the one the vehicle is actually taking, VDC applies braking power and/or reduces engine torque to help correct vehicle path. Standard on all models.
Traction Control System (TCS) VDC also incorporates an all-wheel, all-speed traction control system which senses a loss of traction and applies braking force to the slipping wheel or wheels as necessary to maintain vehicle motion.

CHASSIS
Steering Rack-and-pinion with engine-speed controlled variable power assist.
Suspension Front: MacPherson-type struts with internal rebound springs, lower L-arms, coil springs and stabilizer bar.
Rear: Double wishbone with subframe.
Brakes Power-assisted 4-wheel disc with Electronic Brake-force Distribution (EBD), 4-channel / 4-sensor ABS and Brake Assist.

WHEELS AND TIRES
Wheels 2.5i base: 16-in. Steel with full wheel covers
All others: 17-in. Aluminum-alloy		 17-in. Aluminum-alloy
Tires 215/70R16 / 225/60R17 225/60R17
EXTERIOR DIMENSIONS
Length/Width/Height 188.2 in./71.7 in./65.7 in. (with roof rails)
Wheelbase 107.9 in.


Specifications are subject to change.
1SPORTSHIFT is a registered trademark of Prodrive, LTD.


* indicates required fields.

Contact Information
Feedback
Submit

Hours

  • Monday: 9:00am - 9:00pm
  • Tuesday: 9:00am - 9:00pm
  • Wednesday: 9:00am - 9:00pm
  • Thursday: 9:00am - 9:00pm
  • Friday: 9:00am - 9:00pm
  • Saturday: 9:00am - 5:00pm
  • Sunday: CLOSED

Get Directions